-
Mont Taylor describes the High Temp Block Diagram for downhole drilling. (1396 Views, 0 Comments)
-
Mont Taylor describes the HiReliability Segments. (1707 Views, 0 Comments)
-
The ADM2582E/ADM2587E, by Analog Devices, are fully integrated isolated data transceivers with ±15 kV ESD protection and is suitable for high speed communication on multipoint transmission lines. (1748 Views, 0 Comments)
-
This in-depth video, from Analog Devices, shows how to reduce EMI (electromagnetic interference) in isoPower®-based devices. isoPower® is a complete and fully integrated isolation solution for power transfer across an isolation barrier using micro-transformers...
-
The ADP2114 is a dual channel step down switching regulator with integrated MOSFETs and is designed to be extremely versatile. The device can be configured as two channels with output current 2A and 2A or with one output supplying 3A and the other 1A...
-
This video compares the ADMP401 Analog MEMS and the ADMP421 Digital MEMS with a BK Type 4939 Measurement microphone. iMEMS(r) Microphones have high performance and reliability with 61dB A-weighted SNR and flat frequency response from 100Hz to > 12kHz...
-
In this Whiteboard Wizard, Intersil Senior Principal Application Engineer David Laing discusses the reason designers should use chopper stabilized amplifiers such as Intersil's ISL28133. Presented by David Laing. (3484 Views, 4 Comments)
-
This video features the thought leaders (engineers and marketers) involved with the creation of the AD9262. The AD9262 is a dual, 16-bit analog-to-digital converter (ADC) based on a continuous time sigma-delta architecture that achieves 86 dB of dynamic...
-
The ADAS1128 is a 128-channel, analog-current-to-digital converter. It contains 128 low-power, low-noise, low-input current integrators, simultaneous sample-holds and two high-speed, high-resolution ADCs with configurable sampling rate and resolution...
-
Learn how to simplify design and reduce cost by using a single IC to interface +/-10V industrial signals to a +5V single-supply ADC. (1273 Views, 0 Comments)
-
The ADuM4160 is an integrated single chip USB isolator. It is designed to provide isolation in the D+/D- lines and works with existing USB ports. Based on Analog Devices' patented iCoupler technology, the ADuM4160 combines the ease of use of an off...
-
In this Whiteboard Wizard, Intersil Senior Marketing Manager Chris Ludeman discusses the advantages of using Intersil's ISL54214 USB 2.0 High-Speed x 2Channels/Stereo Audio Dual in smart phones. (1571 Views, 1 Comments)
-
Whiteboard Wizard about Low Power Pressure Sensor solutions presented by Tony Ochoa of Intersil. This video demonstrates the use of Intersil parts ISL21060, ISL28133, and ISL8171/2 to make a 5V Low Power Pressure Sensor. (2312 Views, 2 Comments)
-
Whiteboard Wizard about DCPs presented by Heather Babcock of Intersil in two parts. In this part, we compare DCPs (Digitally Controlled Potentiometers) to mechanical potentiometers. (2130 Views, 3 Comments)
-
A test design idea that enables the quantitative measure of the circuit’s susceptibility to RF signals using standard equipment found in any analog high speed lab presented by Don LaFontaine. (2035 Views, 2 Comments)