The ADM2582E/ADM2587E, by Analog Devices, are fully integrated isolated data transceivers with ±15 kV ESD protection and is suitable for high speed communication on multipoint transmission lines. [Video]

This in-depth video, from Analog Devices, shows how to reduce EMI (electromagnetic interference) in isoPower®-based devices. isoPower® is a complete and fully integrated isolation solution for power transfer across an isolation barrier using micro-transformers. [Video]

The ADP2114 is a dual channel step down switching regulator with integrated MOSFETs and is designed to be extremely versatile. The device can be configured as two channels with output current 2A and 2A or with one output supplying 3A and the other 1A or alternatively, the device can be configured as a single, interleaved output supporting 4A total ...

This video compares the ADMP401 Analog MEMS and the ADMP421 Digital MEMS with a BK Type 4939 Measurement microphone. iMEMS(r) Microphones have high performance and reliability with 61dB A-weighted SNR and flat frequency response from 100Hz to > 12kHz. [Video]

This video features the thought leaders (engineers and marketers) involved with the creation of the AD9262. The AD9262 is a dual, 16-bit analog-to-digital converter (ADC) based on a continuous time sigma-delta architecture that achieves 86 dB of dynamic range over a 10 MHz input bandwidth. [Video]

The ADAS1128 is a 128-channel, analog-current-to-digital converter. It contains 128 low-power, low-noise, low-input current integrators, simultaneous sample-holds and two high-speed, high-resolution ADCs with configurable sampling rate and resolution up to 24 bits. The primary application is CT Scanners. [Video]

Learn how to simplify design and reduce cost by using a single IC to interface +/-10V industrial signals to a +5V single-supply ADC. [Video]

The ADuM4160 is an integrated single chip USB isolator. It is designed to provide isolation in the D+/D- lines and works with existing USB ports. Based on Analog Devices' patented iCoupler technology, the ADuM4160 combines the ease of use of an off-the-shelf isolated USB module with the integration capability of a stand alone Serial Interface ...

This tool helps with the selection, evaluation and troubleshooting of voltage feedback Op-Amps. It uses typical data to model the behavior of a selected amplifier. It allows a user to select an amplifier, configure a circuit, apply a signal and evaluate the performance. It is useful for checking an amplifier's spec's such as Bandwidth, ...

The AD8235 is the industry's smallest, lowest power instrumentation amplifier. It has rail to rail outputs and can operate on voltages as low as 1.8V. The 40uA supply current, with 50nA shutdown current makes it an excellent choice in battery powered applications. [Video]